How do resistance units relate?

1 MΩ = 1000 kΩ = 1,000,000 Ω. Wire resistance is often in milliohms per foot.

What's the relationship between volts, amps, and watts?

Power (Watts) = Voltage (Volts) × Current (Amps). To find any value, divide or multiply: Amps = Watts/Volts, Volts = Watts/Amps.

Is AWG or metric wire gauge better?

AWG (American Wire Gauge) uses arbitrary numbers where smaller = thicker. Metric (mm²) directly indicates cross-sectional area, making calculations easier.

Resistance Converter

Free online electrical unit converter.

Convert between all electrical units instantly with accurate results, formulas, and reference tables.

No signup required.

Show this tool on your website

Last updatedMay 21, 2026How we build & check our tools

This calculator requires JavaScript to function. Please enable JavaScript in your browser to use all features.

How This Tool Works

Our Resistance Converter provides instant and reliable conversion across the entire spectrum of electrical resistance units. Whether you are dealing with Ohms (Ω), kiloOhms (kΩ), MegaOhms (MΩ), or even more specialized units, this tool handles the complex mathematical relationships for you.

Simply input the value and select the unit you wish to convert from and to. The system uses established electrical formulas—such as those relating resistance to voltage and current (Ohm's Law)—to calculate the precise equivalent value. For example, converting 1 MΩ into kΩ is a straightforward division by 1000, which our tool executes instantly without needing manual calculation or reference tables.

The accuracy of this converter comes from its comprehensive database of electrical standards. No sign-up is required, ensuring immediate access to accurate results whenever you need them for your circuit design or electrical study.

Why This Matters

Understanding unit conversion is crucial for successful electrical engineering and electronics work. Using the wrong resistance unit can lead to catastrophic circuit failure, improper component sizing, or system malfunction.

This converter ensures that all your calculations—from calculating pull-down resistors in microcontrollers to scaling values on industrial equipment—are based on a single, correct standard. For instance, if a circuit requires 10 kΩ but you mistakenly use 10 MΩ, the resulting current draw will be drastically incorrect.

By providing instant verification and precise conversion (e.g., ensuring that 22 kΩ is correctly interpreted regardless of whether it's listed as 22000 Ω), we save you time, prevent costly errors, and guarantee that your designed circuits function exactly as intended.

Common Mistakes to Avoid

The most common pitfall when working with electrical units is confusing prefixes or failing to account for the magnitude of resistance. Always double-check whether your value is in Ohms (Ω) or if it represents a scaled unit like kΩ or MΩ.

Unit Scaling Error: Mistaking 10 kΩ for 10 Ω. This is a magnitude difference of 1,000 times and can burn out components instantly.
Always verify the unit dropdown menu before hitting convert.

Another mistake is assuming linear scaling across all units. While some conversions are simple multiplication/division, electrical relationships must be respected. This tool handles these complexities so you don't have to memorize every conversion factor.

Never rely on manual calculations for critical circuit values; always use a verified converter like this one.

Tips for Best Results

To get the most accurate and efficient results, treat this converter as a foundational check within your overall design workflow. Before finalizing any component value, run it through the tool to confirm unit consistency.

Standardize Units Early: If possible, convert all measured or specified values into a single base unit (like Ohms) early in your project planning phase.
Use the tool to verify conversions when moving between different design phases (e.g., from simulation software output to physical component selection).

If you are working with complex circuits, remember that resistance is often calculated in conjunction with capacitance and inductance. Use this converter for the static resistance values, but always cross-reference your results with Ohm's Law (V=IR) using other calculation methods.

If you are unsure which unit to use, consult an electrical reference manual or ask a professional; this tool is designed for accurate conversion of known values.

Frequently Asked Questions

Common questions about the Resistance Converter

Ohms (Ω), kilohms (kΩ), megohms (MΩ), and milliohms (mΩ) for very low resistances.

Learn More

Sources & References

International System of Units (SI): electric current, voltage and resistance

Electric current, voltage and resistance is measured in the ampere (A), volt (V) and ohm (Ω). Conversions between SI and other units use exact, internationally agreed factors maintained by NIST.

→Source: NIST — International System of Units (SI)

International System of Units (SI)

Authoritative definitions for electric current, voltage and resistance, from the BIPM SI Brochure (9th edition), the defining reference for the SI.

→Source: BIPM — SI Brochure (9th ed.)