Skip to main content

Waveguide Wavelength RF Calculator

Calculate guide wavelength, cutoff frequency, phase and group velocity, and TE-mode wave impedance for rectangular and circular waveguides - with WR-standard references and worked examples.

Last updatedHow we build & check our tools
Results will appear here once you enter your values.

Advertisement

Sizing a waveguide: cutoff, band edges, and mode choice

The broad wall alone sets the dominant-mode cutoff: for TE₁₀ in an air-filled rectangular guide, fc = c/(2a). The WR numbering encodes that dimension directly — WR-90 means a broad wall of 0.90 inches (22.86 mm), giving fc = 299,792,458 / (2 × 0.02286) = 6.557 GHz. Every standard waveguide band follows the same rule of thumb: operate from about 1.25 × fc up to roughly 1.9 × fc, staying safely above the high-dispersion region near cutoff and safely below the TE₂₀ cutoff at 2 × fc where the guide stops being single-mode. For WR-90 that works out to 8.2–12.4 GHz — the classic X-band — exactly the range quoted in supplier catalogs.

Below about 1.25 × fc, the guide wavelength λg stretches toward infinity, attenuation climbs steeply, and group delay varies violently with frequency. Near 2 × fc, the TE₂₀ mode begins to propagate and power splits unpredictably between modes. If you need a wider usable range, the only fixes are a larger guide (lower fc) or a ridged guide, which lowers cutoff without giving up cross-section.

Circular guides follow different math: for the dominant TE₁₁ mode the cutoff wavelength is λc = 2πr/χ′, where χ′ = 1.841 is the first zero of the Bessel-function derivative. A circular guide needs a noticeably larger cross-section than a rectangular one for the same cutoff — compare the 40 mm diameter of a TE₁₁ guide with a 6.56 GHz-class cutoff against WR-90's 22.86 mm broad wall at the same cutoff frequency.

Worked examples: WR-90 at 10 GHz and a circular guide at 6 GHz

Example 1 — WR-90 (X-band) at 10 GHz, TE₁₀ mode. The broad wall a = 22.86 mm gives λc = 2a = 45.72 mm and fc = 6.557 GHz. At 10 GHz the free-space wavelength is λ₀ = 29.98 mm and fc/f = 0.6557, so λg = 29.98 / √(1 − 0.6557²) = 39.71 mm — a guide wavelength 32% longer than free space. The phase velocity is 1.324 c (energy itself travels at the group velocity, 0.755 c), and the TE wave impedance is 377/0.755 = 499 Ω. Repeat at the band edges and the spread is dramatic: 55.43 mm at 8.5 GHz versus 29.83 mm at 12 GHz — which is why broadband guide designs cannot assume a fixed λg.

Example 2 — circular guide, TE₁₁, radius 20 mm at 6 GHz. With χ′ = 1.841, λc = 2π × 20/1.841 = 68.26 mm and fc = 4.392 GHz. At 6 GHz, λ₀ = 49.97 mm and fc/f = 0.7320, giving λg = 49.97/√(1 − 0.7320²) = 73.34 mm.

Both examples follow the exact formulas this calculator evaluates — λg = λ₀/√(1 − (fc/f)²) with c = 299,792,458 m/s — hand-verified on 2026-11-12. Use λg, not λ₀, when cutting matching stubs or setting cavity lengths (a half-wave resonator is λg/2 long, not λ₀/2).

Frequently Asked Questions

Common questions about the Waveguide Wavelength RF Calculator

VSWR (Voltage Standing Wave Ratio) indicates antenna/transmission line matching. 1:1 is perfect, under 2:1 is acceptable for most applications.

Advertisement

Sources & References

Radio-frequency and spectrum references

Frequency, wavelength, and power relationships for radio signals; frequency expressed in hertz (Hz) per the SI.

International System of Units (SI)

SI definitions and conversion factors for frequency (hertz), maintained by NIST.